TinyCAD Manual
tinycad.net

TinyCAD Changelog

Unreleased

Added

  • AI-assisted symbol, library and circuit editing, including attached datasheets/images, bundled and online symbol search, direct edits to the active document, undoable changes, provider/model settings and local Ollama connections.

  • Integrated simulation using local ngspice in the browser and Desktop, with operating-point, transient, AC, DC sweep, noise, transfer-function and pole-zero analyses. Event-driven XSPICE is supported in Desktop.
  • Sources, probes and virtual instruments, including oscilloscopes, multimeters, function generators and bench supplies.
  • Circuit Explorer for tuning, sweeps, named measurements, requirements, DC overlays, tolerance studies, test cases and power/stress investigations.
  • Compressed .dzn drawings that keep the circuit, models, simulation settings and optional results together. Run history and result exports support comparison and sharing; Save without results creates a smaller copy.
  • Bundled libraries for network layouts, embedded boards and smart-home modules, audio, laboratory equipment, motors/motion and solar/battery planning, alongside modelled SPICE, logic, functional and sensor collections. Choose them from the library picker’s Standard tab.
  • Seven editable drawing examples, covering the original transistor amplifier, office network, ESP32 climate/display station, solar/battery home, podcast studio, laboratory bench and motor-control bench, with embedded symbols and explanations.
  • SPICE and XSPICE tutorials: eleven analogue and six digital chapters, with 28 distinct runnable drawings, model definitions, analysis settings and retained reference acquisitions.
  • Layout tidy-up for whole sheets or selected items, with Low/Medium/High strength, cancellation, connection checks and one-step Undo.

Changed

  • Open Example and Explanation are in the browser title bar. Desktop provides File → Open Example and View → View Explanation.
  • Desktop’s View menu includes Show Charts; the toolbar’s Simulation menu retains its chart toggle.
  • Auto-layout sits beside Simulation on the toolbar and is also available under Desktop’s Tools menu.

Fixed

  • Restore draggable component artwork previews in Standard, My Libraries and Online picker results.
  • Reduce embedded-controller, sensor and display artwork to practical page-layout sizes while preserving pin identities and wiring positions.
  • Prevent layout changes from creating unwanted connections at wire endpoints, bends or sockets; improve pin exits and remove unnecessary detours.
  • Remove small terminal-label boxes that overlap text in laboratory and motion-control symbols, and update the affected examples.
  • Improve simulation error reporting and diagnostics, browser amplifier runs, chart pop-outs and independent example-explanation panels.

Manual

  • Add an Images guide covering copy and paste, file import and format conversion, fixed aspect ratio, pixel clipping and saving images with the drawing.

  • Add a complete AI assistant guide, covering symbol/library and circuit creation, provider setup with screenshots, local Ollama, document attachments, example prompts and review of generated results.

  • Add guides to finding and using bundled libraries and examples, and replace the export-only SPICE description with the integrated simulation workflow.
  • Add analysis, model, instrument, chart, measurement and troubleshooting references, with official ngspice and XSPICE documentation links.
  • Include the complete existing courses, downloadable drawings/netlists and ten video walkthroughs covering libraries, examples, layout tidy-up, multi-sheet connections and SPICE.
  • Clarify feature differences, including .dzn and Markdown text-box compatibility and browser XSPICE support.
  • Update the manual in all eight supported languages, including navigation, new reference pages, tutorial text and video captions.

v4.0.11

This release adds formatted Markdown notes, vector SVG output and wire routing controls.

  • Markdown text boxes: formatted notes with lists, task lists and code blocks; the same vector renderer for the drawing, SVG export and PDF.
  • Live source formatting keeps editable markers visible and follows the chosen base font, with matching caret placement, selection and wrapping.
  • Wire routing modes: a compact selector for 90°, 45° and Free routing, preserving an active preview.
  • The loupe button appears only after touch input on the drawing canvas.

v4.0.10 — 6 November 2026

  • Keep the editor toolbar visible when library or schematic panels need more vertical space.

v4.0.9 — 4 November 2026

Added

Fixed

  • Grid visibility and snapping work independently, and keyboard movement respects disabled snapping.
  • Bitmap images render in placed library symbols.
  • Escape cancels drawing and placement actions, including when toolbar controls have focus.
  • Cancelling the desktop unsaved-changes prompt clears the pending quit.
  • Canvas pinch zoom no longer compounds with browser page zoom.
  • Improved touch-loupe positioning, pointer feedback, gesture handling and dragging.
  • Improved desktop and macOS About dialog behavior.

Packaging and maintenance

  • Updated dependencies to address security vulnerabilities.
  • Removed Linux ARMv7 packages because the Electron runtime supports Linux x64 and ARM64. Snap packages target x64; Debian packages target x64 and ARM64.

Release downloads · Source changes

v4.0.8 — 3 May 2026

  • Fixed power-symbol rotation when saving and reopening a drawing.
  • Preserved wire net types when saving and loading, keeping wire colours consistent.

Release downloads · Source changes

v4.0.7 — 13 April 2026

  • Fixed printing in the desktop application.
  • Improved pinch-zoom behavior to prevent uncontrolled zooming.
  • Added server-side rendering of library symbols.
  • Automated tagging of production builds and creation of GitHub releases.

Release downloads · Source changes

v4.0.6 — 29 March 2026

This release includes the development changes made under version 4.0.5; there is no separate 4.0.5 tag or published GitHub release.

Added

  • Automatic wire routing.
  • Replace Symbol for changing an existing component to another library symbol.
  • Automatic scrolling while dragging near the edge of the drawing.
  • Double-click selection of a complete wire and triple-click selection beyond junctions and tees.
  • An option to turn off the label connection indicator.

Fixed and improved

  • Library folders open by default and expand when searching.
  • Improved text editing, clipboard shortcuts, navigation keys and keyboard accelerators while the drawing has focus.
  • Fixed Ctrl-click selection, dragging multiple selected objects, and spin controls.
  • Drawing and selection rectangles can be dragged in either direction.
  • Fixed quitting on macOS and reduced duplicate library loading on macOS.
  • Fixed label positioning, colour-picker translation and netlist background processing.
  • Corrected Windows installer and AppX build names.

Release downloads · Source changes

v4.0.4 — source tag, 19 March 2026

  • Added library folders to organise symbol libraries.
  • Added Dutch interface translation.
  • Added browser build artifacts and deployment to GitHub Pages.
  • Fixed Snap packaging.

Source changes

v4.0.3 — source tag, 15 March 2026

  • Adjusted macOS startup handling to address a startup problem.

The source tag is 4.0.3, although its package metadata still reports 4.0.2.

Source changes

v4.0.2 — 14 March 2026

  • Fixed the unsaved-changes close dialog on Linux.
  • Added x64 Debian packages alongside the existing ARM builds.
  • Updated build tooling and packaging configuration.

Release downloads · Source changes

v4.0.1 — initial source tag, 13 March 2026

The first source snapshot already contains the TinyCAD rewrite for browser and desktop use, with schematic editing, symbol libraries, support for existing .dsn and .tclib files, and export workflows. Earlier development is not recorded in this repository.

Initial source snapshot