TinyCAD Manual
tinycad.net

Start here: how to use these tutorials

Contents · Next: your first SPICE simulation

These tutorials combine explanations with circuits you can run and change in TinyCAD. The examples are already bundled with TinyCAD. You do not need to download a tutorial ZIP, find a drawing on disk or install a separate SPICE program to follow the lessons.

Start with the SPICE course if simulation is new to you. It begins with voltage, current and simple circuits, then progresses to waveforms, filters, amplifiers and design investigations. The separate XSPICE course covers event-driven logic and mixed-signal simulation. Use TinyCAD Desktop for that course; the browser engine does not include XSPICE.

Find and open the bundled examples

  1. Open TinyCAD and look for Open Example on the right of the browser title bar, or File → Open Example in Desktop. It has an open-folder icon. This opens the example browser.
  2. Choose SPICE tutorial for the analogue lessons, or XSPICE and digital tutorial for the digital lessons. The groups also appear in the browser’s navigation area.
  3. In the group’s Drawings list, select the example named in the lesson. For your first experiment, select divider in SPICE tutorial.
  4. Read its description and check the circuit preview. Selecting the example shows its details; it does not yet replace your drawing.
  5. Choose Open drawing at the bottom of the browser. TinyCAD opens an editable copy of the example. If you have unsaved work, handle the save prompt before continuing.

The short instruction Open Example → SPICE tutorial → divider → Open drawing means these same steps. A name such as divider, rc-ac or logic-counter is the example’s name in this browser, not a filename you need to locate.

Use Search groups and examples to find a named example. If a filter hides what you need, clear the search and use All groups to return to the group list. Open drawing becomes available after you select an example. The Start here — using the tutorials entry also displays this guide and opens the same first divider circuit.

Watch open, run and change a divider for a captioned walkthrough of these steps and your first two acquisitions.

Follow a lesson alongside its circuit

Keep the chapter available in your manual or Markdown viewer while working in TinyCAD. The example browser also displays the associated lesson description. Each chapter begins by naming the embedded examples it uses. Some chapters use several: for instance, the signal-generator chapter provides separate source examples so you can study one waveform at a time.

Use this routine for each experiment:

  1. Read the question. Identify what you are investigating: a DC voltage, charging time, cutoff frequency, logic state or another quantity.
  2. Inspect the circuit. Find its source, ground, component values and named signals. Labels such as IN and OUT identify electrical nodes; references such as R1 and C1 identify components.
  3. Check the saved setup. Select the Simulation sheet and look at Setup. The examples already contain the analysis settings and models needed for the lesson.
  4. Predict the result, using the explanation or equation in the chapter.
  5. Choose Run, then compare the new acquisition with the expected values and plots. Inspect the numbers as well as the shape of the trace.
  6. Change one thing as suggested by the lesson, predict its effect and run again. Record the setting you changed and what happened.

After opening an example, choose Explanation in the browser title bar, or View → View Explanation in Desktop to keep its instructions beside the drawing. The explanation panel sits alongside the simulation charts and can be resized or closed independently. Choose Explanation again in the browser title bar, or View → View Explanation in Desktop, to reopen it.

The toolbar’s pulse-shaped icon has the hover text Simulation. Whenever a lesson says Simulation → Show charts or Simulation → SPICE components, open that icon’s menu. The Simulation sheet is a separate tab within the drawing; it contains the experiment’s setup and results views.

TinyCAD with the first divider circuit and its simulation chart panel

This application screenshot shows the divider after opening it, with its sheet tabs below the circuit and the chart panel on the right. The key starting points are the circuit, the Simulation sheet and Run.

Understand the expected outputs

Circuit images show the arrangement and connections to look for. Result plots show reference data computed by the solver. Application screenshots show where to work in TinyCAD. Your window size, zoom and chart colours may differ; compare the circuit values, signals, units and analysis settings.

For the unchanged divider example, the source is 5 V and both resistors are 1 kΩ. After an operating-point run, expect IN = 5 V, OUT = 2.5 V and source current v1#branch = −2.5 mA. An operating point has one value per signal, so it does not produce a time-varying waveform. The first lesson explains the current sign and the voltage-divider calculation.

The drawings include retained reference acquisitions, so results may already be visible before you press Run. These are stored results from an earlier run. After editing the circuit or its settings, run again and inspect the new acquisition. Small numerical differences are normal; a large difference calls for checking component values, model assumptions, units and measurement windows.

Keep experiments and return to the original

Embedded examples open as editable copies. Use Save As to save your work under a meaningful name, such as a divider with a different lower resistor. Saving your copy does not change the bundled original.

To reset an experiment, open the named example again through Open Example. Save any changes you want to keep when prompted. This restores the example’s original circuit, settings and retained reference results. Use the same process when a chapter moves to another example.

Normal saving can preserve acquired results with the drawing. Save without results keeps the circuit and settings but omits the stored results; run the simulation again when you next need them.

Choose your route through the material

Your aim Where to begin
Learn simulation from the beginning SPICE chapter 1, then work through the chapters in order
Understand TinyCAD’s engines, symbols and controls How TinyCAD implements SPICE
Choose an input waveform Signal generators
Investigate the rebuilt AMP.DSN amplifier Amplifier bias, followed by gain and power
Learn event-driven digital simulation XSPICE chapter 1, using Desktop

The links at the top of each chapter return to the contents or move to the next lesson. You can revisit an earlier example at any time. If an experiment fails, read its Diagnostics view and compare it with a freshly opened embedded example before making further changes.

Current Circuit Explorer controls

Choose the Simulation sheet, open Setup and scroll to Circuit Explorer. Use Add tools to add Measurements, Tune / sweep, Requirements, DC overlay or Analysis lab. Configured tools appear on the left; the chart panel remains a separate view. Run and Stop are in the main toolbar when a Simulation sheet is selected. See Charts, measurements and Circuit Explorer for the current reference.