TinyCAD Manual
tinycad.net

Simulation tutorials

Start with How to use these tutorials and open the bundled examples, then continue to SPICE: overview and your first simulation. For event-driven logic, start with the separate XSPICE and digital course.

There is a shared introductory chapter, eleven SPICE chapters and six XSPICE chapters. The complete courses, runnable drawings, images and recordings are included in this manual. All tutorial examples are bundled with TinyCAD; no tutorial download is needed. Choose Open Example in the browser title bar, or File → Open Example in Desktop, select SPICE tutorial or XSPICE and digital tutorial, select the example named in the chapter, then choose Open Drawing. This opens an editable copy; use Save As to keep your experiments and open the embedded example again to start afresh. Drawings include embedded symbols, model definitions, analysis settings and a retained reference acquisition.

SPICE

  1. Overview and first run
  2. DC voltage, current and power
  3. Signal generators and stimuli
  4. Transient analysis and RC charging
  5. Frequency response and filters
  6. Diodes, rectification and ripple
  7. Rebuilding AMP.DSN
  8. Amplifier gain and bandwidth
  9. Amplifier output, clipping and power
  10. Sweeps, noise and design investigations
  11. How TinyCAD implements SPICE: engines, symbols and workflow

Video walkthroughs

Five short videos demonstrate the steps where seeing the controls helps most. The videos use TinyCAD in the browser with bundled ngspice. Play them in the lesson’s embedded player, or use these links in a Markdown viewer:

Lesson Demonstration
1 Open, run and change a divider
3 Source settings and waveform preview
4 RC charging, timestep and time constant
5 AC magnitude, dB, phase and cutoff
6 Measure settled rectifier ripple

The videos supplement the written instructions and figures. Use the chapter text for equations, assumptions and expected values. Desktop menus differ from the browser; use File → Open Example there.

XSPICE and digital simulation

  1. Models, bridges and first run
  2. Gates and truth tables
  3. Propagation delay and hazards
  4. Flip-flops, clocks and reset
  5. Counters and divided clocks
  6. Mixed-signal filtering and unknown states

XSPICE examples require TinyCAD Desktop’s native engine. The ordinary SPICE examples use analogue models, but numerical qualification of this bundle was performed with bundled native ngspice 47. A successful native run is not a claim that every browser/version combination has been tested.

Circuit figures are rendered from reopened TinyCAD drawings. Result figures are plots of actual solver data, not hand-drawn expected waveforms. Captions identify application screenshots separately. Small numerical differences from the printed values are normal when model, temperature, timestep or engine version changes.

Manual reference

For current controls, models, analysis settings, charts and troubleshooting, see Simulation and Bundled examples. Desktop access is File → Open Example and View → View Explanation.

Analogue drawing downloads

Use the bundled example browser, or download a drawing here and open it in TinyCAD. Netlists are provided separately as text.

Example Drawing Netlist
amp-ac TinyCAD drawing SPICE text
amp-bias TinyCAD drawing SPICE text
amp-clipping TinyCAD drawing SPICE text
amp-small-signal TinyCAD drawing SPICE text
controlled-source TinyCAD drawing SPICE text
dc-sweep TinyCAD drawing SPICE text
divider TinyCAD drawing SPICE text
rc-ac TinyCAD drawing SPICE text
rc-noise TinyCAD drawing SPICE text
rc-pz TinyCAD drawing SPICE text
rc-step TinyCAD drawing SPICE text
rc-tf TinyCAD drawing SPICE text
rectifier TinyCAD drawing SPICE text
source-current TinyCAD drawing SPICE text
source-dc TinyCAD drawing SPICE text
source-exponential TinyCAD drawing SPICE text
source-fm TinyCAD drawing SPICE text
source-pulse TinyCAD drawing SPICE text
source-pwl TinyCAD drawing SPICE text
source-sine TinyCAD drawing SPICE text
source-triangle TinyCAD drawing SPICE text

XSPICE drawing downloads

Use the bundled example browser, or download a drawing here and open it in TinyCAD. Netlists are provided separately as text.

Example Drawing Netlist
logic-buffer TinyCAD drawing SPICE text
logic-counter TinyCAD drawing SPICE text
logic-dff TinyCAD drawing SPICE text
logic-filter TinyCAD drawing SPICE text
logic-hazard TinyCAD drawing SPICE text
logic-nand TinyCAD drawing SPICE text
logic-unknown TinyCAD drawing SPICE text